Tec 132 Frame - High Efficiency 5.5kW 3ph 2 Pole AC Motor for 400V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Can be used over a 10:1 Speed Control range from 290RPM to 2900RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 5.5kW (7.5HP) x 2900RPM at 400V x 50Hz 3ph.
Full Load Current - 10.2 at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.89 when mains connected at 50Hz.
252mm Wide x 437mm Long x 318mm high overall in its IP55 enclosure.
Flange mount on M12 tapped holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange.
Shaft is 38mm dia x 80mm long.
Weight is xxkg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 5.523TECAB14B-132
For Variable Speed use…
Part time Output when Inverter powered is...
18.1Nm - 5.5kW (7.5HP) x 2900RPM at 50Hz
18.1Nm - 2.75kW (3.7HP) x 1450RPM at 25Hz
18.1Nm - 0.55kW (0.75HP) x 290RPM at 5Hz
Continuous Output when Inverter powered is...
18.1Nm - 5.5kW (7.5HP) x 2900RPM at 50Hz
15.4Nm - 2.3kW (3.1HP) x 1450RPM at 25Hz
9Nm - 0.28kW (0.37HP) x 290RPM at 5Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.