TEC Electric 0.55kW 3ph 4 Pole B3 Foot 80 Frame AC Motor for 230V or 400V 3 phase supply with holding brake. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Output: 0.55kW at 1430rpm, 230V or 400V, 50Hz 3ph.
Speed Range from Inverter Supply: From 142rpm to 1704rpm for 5Hz to 60Hz control, with suitable de-rating at the lower speeds.
Full Load Current with links in Delta for 230V 3ph: 2.4A.
Full Load Current with links in Star for 400V 3ph: 1.38A. (Default).
Torque: 3.67Nm
Power Factor: 77.1 when mains connected at 50Hz.
Efficiency: 80.8% @ 100%(IE2)
Efficiency: 80.6% @ 100%(IE2)
Efficiency: 79.2% @ 100%(IE2)
Terminal box position: Top (default), sides (move feet).
Enclosure rating: IP55
160mm Wide x 343mm Long (Including shaft and brake) x 210mm high overall (Including terminal box)
Foot mount on 10mm holes at 125mm wide x 100mm centres 50mm back from the shaft shoulder; Face mount on 4 x M6 tapped holes at 100mm PCD with 80mm diameter register in the 120mm diameter flange
Shaft: 19mm diameter, 40mm long with 6mm key.
Gland: 1-M20x1.5
Construction: Aluminium with removable feet.
Weight is 9kg.
Brake: BLC457-08 with hand release
Brake torque(Speed100r/min)(Nm): 8Nm
Brake Supply: 230Vac to the 205Vdc x 25W coil from a full wave rectifier in the terminal box. (requires a separate 230V supply for use with an AC Inverter)
For direct on line use 400V supply, brake is connected to star point and an incomming phase
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part Number: 0.5543TECAB3 80-IE2-BM