TEC IE1 4kW Cast Iron Three Phase Motor 400V 8 Pole 160M Frame B35

TEC Electric - 4kW 3ph 8 Pole IE1 Multi-Mounting (B35) 160M Cast Iron Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 4kW (5.5HP) x 720RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 72RPM to 1008RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Power: 4.0kW at 400V or 690V 50Hz.
Speed: 730rpm at 50Hz.
Torque: 52.3Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 9.89A
Full Load Current with links in STAR (690V 3ph): 5.71A.
Power Factor: 0.73 when mains connected at 50Hz.
Efficiency: 80% (IE1) at 50Hz.

316mm Wide x 605mm Long x 404mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 254mm wide x 210mm centres 110mm back from the shaft shoulder.
Shaft is 42mm dia x 110mm with 12mm wide key.
Weight is 108kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 4.083TECCB35 (T1C 160M1-8)

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.