TEC Electric - 3kW 3ph 6 Pole High Efficiency Foot Mounting (B3) 132S Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 3kW (4HP) x 960RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 96RPM to 1344RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 11.85A at 230V, 6.84A at 400V.
Power Factor is 0.76 when mains connected at 50Hz.
Efficiency is 83.3%
252mm Wide x XXXmm Long x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 35.2kg.
Fitted with 1024ppr encoder and extended cowl (no force ventilation). Encoder type IH580/1400 R63/1024ppr
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-132S-6-B3
For Variable Speed use:-
Part Time Output when Inverter powered is...
14.92Nm - 3kW ( 4.02HP) x 1920 RPM at 100 Hz
29.84Nm -3kW ( 4.02HP) x 960 RPM at 50 Hz
29.84Nm -1.5kW ( 2.01HP) x 480 RPM at 25 Hz
29.84Nm - 0.3kW (0.4HP) x 96 RPM at 5 Hz
Continuous Output when Inverter powered is...
21.31Nm -3kW ( 4.02HP) x 1344 RPM at 70 Hz
29.84Nm -3kW ( 4.02HP) x 960 RPM at 50 Hz
25.37Nm - 1.28kW ( 1.71HP) x 480 RPM at 25 Hz
14.92Nm - 0.15kW (0.2HP) x 96 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.