TEC - 0.37kW 3ph 8 Pole Foot Mounting 90S Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with Variable Frequency Inverter Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Main Supply Output: 0.37kW (0.5HP) x 680RPM at 230V or 400V x 50Hz 3ph.
Inverter Drive Supply Output: 12:1 Speed Control range from 68RPM to 816RPM (5Hz to 60Hz), with suitable de-rating at the lower speeds.
Full Load Current - 2.34A at 230V, or 1.35A at 400V.
Efficiency is 63%.
Power Factor is 0.63 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M25 Gland.
175mm Wide x 312mm Long x 229mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 140mm wide x 100mm centres 56mm back from shaft shoulder.
Face mount 4 x M8 holes on 115mm diameter PCD with 140mm outer diameter.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 12.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor over-temperature protection is included.
Part number is - 0.3783TECAB34.
For Variable Speed Use…
Part Time Output when Inverter powered is...
2.6Nm - 0.37kW (0.5HP) x 1360RPM at 100Hz
5.2Nm - 0.37kW (0.5HP) x 680RPM at 50Hz
5.2Nm - 0.18kW (0.25HP) x 340RPM at 25Hz
5.2Nm - 0.037kW (0.05HP) x 68RPM at 5Hz
Continuous Output when Inverter powered is...
4.33Nm - 0.37kW (0.5HP) x 816RPM at 60Hz
5.2Nm - 0.37kW (0.5HP) x 680RPM at 50Hz
3.95Nm - 0.141kW (0.188HP) x 340RPM at 25Hz
1.71Nm - 0.012kW (0.016HP) x 68RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below...