TEC Electric 22kW 3ph 6 Pole High Efficiency Foot Mounting (B3) 200L Cast Iron Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed Supply Output: 22kW (30HP).
Speed: 975RPM.
Voltage: 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 97.5RPM to 1365RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 41.6A at 400V.
Power Factor: 0.84 when mains connected at 50Hz.
Efficiency: 90.9%.
Dimensions: 390mm Wide x 745mm Long x 460mm high overall.
Enclosure Rating: IP55.
Mounting: Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.
Shaft: 55mm dia x 110mm with 16mm wide key.
Weight: 170kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for external over-temperature protection device.
Part Number: TECC2-200L2-6-B3.
For Variable Speed use:-
Part Time Output when Inverter powered is...
107.74Nm, 22kW ( 29.49HP) x 1950 RPM at 100 Hz.
215.49Nm, 22kW ( 30HP) x 975 RPM at 50 Hz.
215.49Nm, 11kW ( 14.75HP) x 488 RPM at 25 Hz.
215.49Nm, 2.2kW (2.95HP) x 98 RPM at 5 Hz.
Continuous Output when Inverter powered is...
153.9Nm, 22kW ( 29.49HP) x 1365 RPM at 70 Hz.
215.49Nm, 22kW ( 30HP) x 975 RPM at 50 Hz.
183.16Nm, 9.35kW ( 12.53HP) x 488 RPM at 25 Hz.
107.74Nm, 1.1kW (1.47HP) x 98 RPM at 5 Hz.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.