TEC IE2 18.5kW Cast Iron Three Phase Motor 400V 6 Pole 200L B3 Foot Mount with Roller Bearing

TEC Electric - 18.5kW 3ph 6 Pole Cast Iron High Efficiency Foot Mounting (B3) 200L Frame AC Motor for 400V 3 phase supply with roller bearing.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 18.5kW (24.8HP) x 975RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 97.5RPM to 1365RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 35.6A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.
Efficiency is 90.4%

390mm Wide x 745mm Long x 460mm high overall in its IP55 enclosure.
Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.
Shaft is 55mm dia x 110mm with 16mm wide key.
Drive End Bearing: SKF NJ Roller Bearing for belt side load.
Weight is 232kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 18.563TECCB3-IE2+Roller Brg

For Variable Speed use:-
Part Time Output when Inverter powered is...
90.6Nm - 18.5kW ( 24.8HP) x 1950 RPM at 100 Hz
181.21Nm -18.5kW ( 25HP) x 975 RPM at 50 Hz
181.21Nm -9.25kW ( 12.4HP) x 488 RPM at 25 Hz
181.21Nm - 1.85kW (2.48HP) x 98 RPM at 5 Hz
Continuous Output when Inverter powered is...
129.4Nm -18.5kW ( 24.8HP) x 1365 RPM at 70 Hz
181.21Nm -18.5kW ( 25HP) x 975 RPM at 50 Hz
154.02Nm - 7.86kW ( 10.54HP) x 488 RPM at 25 Hz
90.6Nm - 0.93kW (1.24HP) x 98 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.