TEC IE2 15kW Aluminium Three Phase Motor 6 Pole 400V 180L Frame B35

TEC Electric - 15kW 3ph 6 Pole High Efficiency Foot and Flange Mounting (B35) 180L Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 15kW (20.1HP) x 975RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 97.5RPM to 1950RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 28.9A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.
Efficiency is 90.1%

340mm Wide x 730mm Long x 440mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 279mm wide x 279mm centres 121mm back from the shaft shoulder.
Flange mount on 19mm holes at 300mm PCD with 250mm diameter spigot in the 350mm diameter flange.
Shaft is 48mm dia x 110mm with 14mm wide key.
Weight is 112.7kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-180L-6-B35

For Variable Speed use:-
Part Time Output when Inverter powered is...
73.46Nm - 15kW ( 20.11HP) x 1950 RPM at 100 Hz
146.92Nm -15kW ( 20HP) x 975 RPM at 50 Hz
146.92Nm -7.5kW ( 10.05HP) x 488 RPM at 25 Hz
146.92Nm - 1.5kW (2.01HP) x 98 RPM at 5 Hz
Continuous Output when Inverter powered is...
104.9Nm -15kW ( 20.11HP) x 1365 RPM at 70 Hz
146.92Nm -15kW ( 20HP) x 975 RPM at 50 Hz
124.88Nm - 6.38kW ( 8.55HP) x 488 RPM at 25 Hz
73.46Nm - 0.75kW (1.01HP) x 98 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.