TEC IE4 110kW Cast Iron 400V 2 Pole 3ph AC Motor with Insulated Bearing Option 315S Frame B35

TEC Electric 110kW 3ph 2 Pole High Efficiency (IE4) B35 Foot and Flange 315S Frame AC Induction Motor for 400V or 690V 3 phase supply  
Suitable for use with a Variable Frequency Inverter Drive (motor is fitted with optional insulated bearing) or a fixed frequency mains supply at 50Hz/60Hz

Rating: 110kW, 2980RPM at 400V or 690V 3ph 50Hz
Full Load Current: 185.83A at 400V (DELTA)
Full Load Current: 107.73A at 690V (Star)
Power Factor: 0.89 when mains connected at 50Hz
Efficiency (IE4): 96% at full load
    96.1% at 75% load
    95.6% at 50% load
Full Load Torque: 352.52Nm 

682mm Wide x 1205mm Long x 825mm High (Including terminal box)
Foot mount on 28mm holes at 508mm wide x 406mm centres 216mm back from the shaft shoulder:
Flange mount on 8 x 24mm holes equispaced on 600mm PCD with 550mm diameter spigot in the 660mm diameter flange
Shaft: 65mm diameter, 140mm long with 18mm key
Cable Glands: 2 x M63
DE Bearings: 6317C3
NDE Bearings: 6317C3 VLO241 (Insulated bearing)

Construction: Cast Iron
IP55
Weight: 979kg
Rated at 40C Ambient
IC 411 Ventilation, space required at rear for cooling air intake
Thermistors fitted (1 per winding)

Part Number: 110.023TECCB35-IE4-INS  Frame Ref: T4C-315S-2-B35