Marelli - IE2 1.5kW (2HP) 4 Pole 230V/400V 3ph B34 Foot & Face Mount AC Motor - MAQ90L4

Marelli - High Efficiency 90 Frame 1.5kW 3ph 4 Pole AC Motor for 230V or 400V x 50Hz 3 phase supply.  Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.

Fixed mains supply output:  1.5kW (2HP) x 1440RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output:  15:1 Speed Control range from 144RPM to 2160RPM at 5Hz to 75Hz, with suitable de-rating at the lower speeds.

Full Load Current - 6.2A at 230V, or 3.6A at 400V.
Power Factor is 0.73 when mains connected at 50Hz.
Efficiency is 82.9% at full load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal Box for 2 x M20 Glands

176mm Wide x 350mm Long x 240mm high overall in its IP55 enclosure.
Face mount on 4 x M8 tapped holes at 115mm pcd with 95mm diameter register in the 140mm diameter flange.
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from shaft shoulder.  Feet can be removed and re-located on either side, for left or right side terminal box positions.
Shaft is 24mm dia x 50mm with 8mm wide key.
Shaft side load is 97kg for 20,000hrs life (6205-2Z bearing)
Weight is 17g.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Part number is - MAQ90L4 (MAQ 90 34)

For Variable Speed use…
Part Time Output when Inverter powered is...
4.97Nm - 1.5kW (2HP) x 2880RPM at 100Hz
9.95m - 1.5kW (2HP) x 1440RPM at 50Hz
9.95Nm - 0.75kW (1HP) x 720RPM at 25Hz
9.95Nm - 0.15kW (0.2HP) x 144RPM at 5Hz

Continuous Output when Inverter powered is...
6.63Nm - 1.5kW (2HP) x 2160RPM at 75Hz
9.95Nm - 1.5kW (2HP) x 1440RPM at 50Hz
8.46Nm - 0.64kW (0.855HP) x 720RPM at 25Hz
4.97Nm - 0.075kW (0.101HP) x 144RPM at 5Hz

Download the Technical Catalogue and dimension drawings from the link below...