TEC Electric – IE2 1.5kW (2HP) 6 Pole AC Induction Motor 230V or 400V B35 Foot and Flange Mount - 100L Frame
TEC Electric - 1.5kW 3ph 6 Pole High Efficiency Foot and Flange Mounting (B35) 100L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 1.5kW (2HP) x 940RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 94RPM to 1880RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 6.43A at 230V, or 3.71A at 400V.
Power Factor is 0.73 when mains connected at 50Hz.
Efficiency is 80%
198mm Wide x 369mm Long x 252mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 160mm wide x 140mm centres 63mm back from the shaft shoulder.
Flange mount on 15mm holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 21.6kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-100L-6-B35
For Variable Speed use:-
Part Time Output when Inverter powered is...
7.62Nm - 1.5kW ( 2.01HP) x 1880 RPM at 100 Hz
15.24Nm -1.5kW ( 2.01HP) x 940 RPM at 50 Hz
15.24Nm -0.75kW ( 1.01HP) x 470 RPM at 25 Hz
15.24Nm - 0.15kW (0.2HP) x 94 RPM at 5 Hz
Continuous Output when Inverter powered is...
10.9Nm -1.5kW ( 2.HP) x 1316 RPM at 70 Hz
15.24Nm -1.5kW ( 2.01HP) x 940 RPM at 50 Hz
12.95Nm - 0.64kW ( 0.85HP) x 470 RPM at 25 Hz
7.62Nm - 0.08kW (0.1HP) x 94 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.