Universal IE2 11kW (15HP) three phase 6 pole B3 Foot mounting 160L frame Braked Aluminium with FVU AC Induction Motor for 400V or 690V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive with 3ph output. Not permitted for use without an Inverter Drive.
Output: 11kW (15HP) x 970rpm at 400V or 690V x 50Hz 3ph.
Constant Power Speed Range: 970rpm
Full Load Current with links in Δ (Delta) for 400V 3ph: 22.9A.
Full Load Current with links in Y (Star) for 690V 3ph: 13.22A.
Torque: 108Nm at 50Hz.
Efficiency: 88.7% (IE2)
Power Factor: 0.79 when mains connected at 50Hz.
Terminal box cable entry: Includes 2 x M32 glands.
Terminal box position: Top, sides.
Enclosure rating: IP65 Upgraded motor
DC Brake fitted type Binder
Tf =200Nm
Tn=108Nm
Pf=134W
Dimensions: 350mm wide x 795mm long x 399mm high overall.(Fan adds approx 260mm to overal length)
Mounting: Foot mount on 15mm holes at 254mm wide x 210mm centres 108mm back from the shaft shoulder.
Shaft: 42mm diameter, 110mm long with 12mm key.
Construction: Aluminium
Weight: 103kg Approx awaint confirmation.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: UMHA160L-6B3 DC Brake IP65 FVU
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.