Universal IE2 4kW (5HP) three phase 2 pole B34 Foot and Face mounting 112M frame AC Induction Motor for 230V or 400V 3 phase supply.
IE2 rated; should be controlled by an AC Inverter Drive to meet EU efficiency rules.
Output: 4kW (5HP) x 2890rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 14:1 Range from 289rpm to 4046rpm for 5Hz to 70Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 2890rpm to 4046rpm continuously.
Full Load Current with links in Δ (Delta) for 230V 3ph: 13.06A.
Full Load Current with links in Y (Star) for 400V 3ph: 7.54A.
Torque: 13.22Nm at 50Hz.
Efficiency: 85.80% (IE2)
Power Factor: 0.89 when mains connected at 50Hz.
Terminal box cable entry: Includes 2 x M25 glands.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 229mm wide x 395mm long x 295mm high overall.
Mounting: Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Face mount on 4 x M8 tapped holes at 130mm PCD with 110mm diameter register in the 160mm diameter flange.
Shaft: 28mm diameter, 60mm long with 8mm key.
Construction: Aluminium
Weight: 25.80kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: UMHA 112M-2 B34-230V or HE31 112 M1 2 B34-230V.
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.