Universal IE3 7.5kW three phase Aluminium 2 pole B5 Flange mounting 132SX frame AC Induction Motor for 400V or 690V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive with 3ph output.
Output: 7.5kW at 2915rpm; 400V or 690V, 50Hz 3ph.
Speed Range from an Inverter Supply: Range from 291.5rpm to 3789.5rpm for 5Hz to 65Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 2915rpm to 3789.5rpm continuously.
Full Load Current with links in Δ (Delta) for 400V 3ph: 13.5A.
Full Load Current with links in Y (Star) for 690V 3ph: 7.8A.
Torque: 24.6Nm
Efficiency: 90.1% (IE3)
Power Factor: 0.89 when mains connected at 50Hz.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 300mm wide x 477mm long x 342mm high overall.
Mounting: Flange mount on 4 x 15mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft: 38mm diameter, 80mm long with 10mm key.
Construction: Aluminium
Weight: 52kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Please note that this motor will be supplied with feet. These can be removed using a standard hex key to convert it to face mount only.
Part number: UM3A 132SX-2 B5