Universal UMHC IE2 30kW (40HP) three phase 2 pole B3 Foot mounting 200L frame AC Induction Motor for 400V or 690V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive with 3ph output. Not permitted for use without an Inverter Drive.
Output: 30kW (40HP) x 2960rpm at 400V or 690V x 50Hz 3ph.
Speed Range from an Inverter Supply: 12:1 Range from 296rpm to 3552rpm for 5Hz to 60Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 2960rpm to 3552rpm continuously.
Full Load Current with links in Δ (Delta) for 400V 3ph: 52.9A.
Full Load Current with links in Y (Star) for 690V 3ph: 30.5A.
Torque: 96.8Nm at 50Hz.
Efficiency: 92.00% (IE2) at 50Hz
Power Factor: 0.89 when mains connected at 50Hz.
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 385mm wide x 770mm long x 505mm high overall.
Mounting: Foot mount on 18.5mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.
Shaft: 55mm diameter, 110mm long with 16mm key.
Construction: Cast Iron
Cooling: TEFC (Totally Enclosed Fan Cooled) IC411 – Fan runs the same speed as the output shaft.
Weight: 243kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: Fitted.
Bearings: Ball Bearing. Type: 6312 2Z C3 (Drive End). 6312 2Z C3 (NDE)
Part number: UMHC 200L-2 B3
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.