Universal 132M Frame - High Efficiency 11kW 3ph 4 Pole AC Motor for 230V/400V 3 phase supply. Not permitted for use without an Inverter Drive.
Fixed mains supply output is 11kW (15HP) x 1460RPM at 230V/400V x 50Hz 3ph.
Full Load Current - 35.64A at 230V and 20.58A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.85 when mains connected at 50Hz.
265mm Wide x 501mm Long x 318mm high overall in its IP65 enclosure.
Foot mount on 4 off M12 at 225mm by 216mm
Flange mount on M12 tapped holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange. (Large Face B14B (C1))
Keyed Shaft is 38mm dia x 80mm long, 10mm key,(Tapped M12 x 28mm)
Weight is 60kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - HR31 132 M3 4 IE2 C1 230 IP65
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.