Teco - IE2 7.5kW (10HP) 2 Pole AC Induction Motor 400V B5 Flange Mount - 132 Frame

TECO Westinghouse 7.5kW 3ph 2 Pole High Efficiency Flange Mounting (B5) D132S Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 7.5kW (10HP) x 2920RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 292RPM to 4380RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 15.7A at 400V.
Power Factor is 0.79 when mains connected at 50Hz.
Efficiency is 88.1%

258mm Wide x 462mm Long x 317mm high overall in its IP55 enclosure.
Flange mount on 4 x 14.5mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 56kg.

Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0132S2-10002-IZ (I2----7-2B5)

For Variable Speed use:-
Part Time Output when Inverter powered is...
16.4Nm - 7.5kW (10HP) x 4380RPM at 75Hz
24.5Nm - 7.5kW (10HP) x 2920RPM at 50Hz
24.53Nm - 3.8kW (5.03HP) x 1460RPM at 25Hz
12.3Nm - 0.75kW (0.56) x 292RPM at 5Hz
Continuous Output when Inverter powered is...
16.4Nm - 7.5kW (10HP) x 4380RPM at 75Hz
24.5Nm - 7.5kW (10HP) x 2920RPM at 50Hz
20.8Nm - 3.19kW (4.3HP) x 1460RPM at 25Hz
12.3Nm - 0.38kW (0.56HP) x 292RPM at 5Hz

Download the full Manual and Dimensions from the link below:-