Teco IE2 0.55kW (0.75HP) 2 Pole 3 Phase AC Motor 230V/400V B3 71 Frame

TECO Westinghouse 0.55kW 3ph 2 Pole High Efficiency Foot Mounting (B3) D71 Frame AC Motor for 230V or 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 0.55kW (0.75HP) x 2780RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 278RPM to 4170RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current:  2.2A at 230V, or 1.27A at 400V.
Power Factor:  0.83 when mains connected at 50Hz.
Efficiency:  75.5%

Dimensions:  136mm Wide x 245mm Long x 187mm high overall in its IP55 enclosure.
Mounting:  Foot mount on 10mm holes at 112mm wide x 90mm centres 45mm back from the shaft shoulder.
Shaft:  14mm dia x 30mm with 5mm wide key.
Weight:  9kg.

Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.

Ambient:  Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistor included for over-temperature protection.
Part number:  ALAA-0071M2-10002-IO (I2-0.55-2B3)

For Variable Speed use:-
Part Time Output when Inverter powered is...
1.26Nm - 0.55kW (0.75HP) x 4170RPM at 75Hz
1.89Nm - 0.55kW (0.75HP) x 2780RPM at 50Hz
1.89Nm - 0.28kW (0.37HP) x 1390RPM at 25Hz
0.94Nm - 0.055kW (0.041) x 278RPM at 5Hz
Continuous Output when Inverter powered is...
1.26Nm - 0.55kW (0.75HP) x 4170RPM at 75Hz
1.89Nm - 0.55kW (0.75HP) x 2780RPM at 50Hz
1.61Nm - 0.23kW (0.31HP) x 1390RPM at 25Hz
0.94Nm - 0.028kW (0.041HP) x 278RPM at 5Hz

Download the full Manual and Dimensions from the link below:-