Teco - IE2 4kW (5.5HP) 4 Pole AC Induction Motor 400V B3 Foot Mount - 112 Frame

TECO Westinghouse 4kW 3ph 4 Pole High Efficiency Foot Mounting (B3) D112M Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 4kW (5.5HP) x 1440RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 144RPM to 2160RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 7.98A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 86.6%

220mm Wide x 415mm Long x 277mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 35kg.

Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0112M0-10004-IO (I2----4-4B3)

For Variable Speed use:-
Part Time Output when Inverter powered is...
13.3Nm - 4kW (5.5HP) x 2880RPM at 100Hz
26.5Nm -  4kW (5.5HP) x 1440RPM at 50Hz
26.53Nm - 2kW (2.68HP) x 720RPM at 25Hz
13.3Nm - 0.4kW (0.3) x 144RPM at 5Hz
Continuous Output when Inverter powered is...
17.7Nm - 4kW (5.5HP) x 2160RPM at 75Hz
26.5Nm - 4kW (5.5HP) x 1440RPM at 50Hz
22.5Nm - 1.7kW (2.3HP) x 720RPM at 25Hz
13.3Nm - 0.2kW (0.3HP) x 144RPM at 5Hz

Download the full Manual and Dimensions from the link below:-