TEC Electric Cast Iron 22kW 3ph 2 Pole Premium Efficiency (IE3), B35 Foot and Flange, 180M Frame AC Motor for 400V or 690V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 22kW at 2945RPM, 400V or 690V Three Phase 50Hz.
Inverter Supply Output: 14:1 Speed Control range from 294.5RPM to 4123RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds
Full Load Current: 38.49A at 400V (DELTA) or 22.22A at 690V (STAR)
Power Factor: 0.89 when mains connected at 50Hz.
Efficiency: 92.7% at full load.
Full Load Torque: 71.34Nm
350mm Wide x 687mm Long x 445mm High (Including terminal box)
Foot mount on 15mm holes at 279mm wide x 241mm centres, 121mm back from the shaft shoulder: Flange mount on 19mm holes at 300mm PCD with 250mm diameter spigot in the 350mm diameter flange
Shaft: 48mm dia x 110mm long with 14mm wide key
Removable Feet
Cast Iron, IP55
Weight: 183.4kg.
Rated at 40C Ambient.
Cooling: IC411. Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 22.23TECCB35-IE3 Frame Reference: T3C 180M-2
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.