TEC IE2 22kW Cast Iron Three Phase Motor 400V 4 Pole 180L Frame B3

TEC Electric - 22kW 3ph 4 Pole High Efficiency Foot Mounting (B3) 180L Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 22kW (30HP) x 1460RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 146RPM to 2920RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 40.6A at 400V.
Power Factor is 0.86 when mains connected at 50Hz.
Efficiency is 91.7%

340mm Wide x 740mm Long x 455mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 279mm wide x 279mm centres 121mm back from the shaft shoulder.
Shaft is 48mm dia x 110mm with 14mm wide key.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECC2-180L-4-B3

For Variable Speed use:-
Part Time Output when Inverter powered is...
71.95Nm - 22kW ( 29.49HP) x 2920 RPM at 100 Hz
143.90Nm - 22kW ( 29.49HP) x 1460 RPM at 50 Hz
143.90Nm -11kW ( 14.75HP) x 730 RPM at 25 Hz
143.90Nm - 2.2kW (2.95HP) x 146 RPM at 5 Hz
Continuous Output when Inverter powered is...
102.8Nm -22kW ( 29.49HP) x 2044 RPM at 70 Hz
143.90Nm -22kW ( 29.49HP) x 1460 RPM at 50 Hz
122.32Nm - 9.35kW ( 12.53HP) x 730 RPM at 25 Hz
71.95Nm - 1.10kW (1.47HP) x 146 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.