TEC IE2 11kW Cast Iron Three Phase Motor 400V 4 Pole 160M Frame B35

TEC Electric - 11kW 3ph 4 Pole High Efficiency Cast Iron Foot and Flange Mounting (B35) 160M Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 11kW (15HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 21.6A at 400V.
Power Factor is 0.82 when mains connected at 50Hz.
Efficiency is 89.8%

290mm Wide x 640mm Long x 384mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 254mm wide x 210mm centres 108mm back from the shaft shoulder.
Flange mount on 19mm holes at 300mm PCD with 250mm diameter spigot in the 350mm diameter flange.
Shaft is 42mm dia x 110mm with 12mm wide key.
Weight is 90kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECC2-160M-4-B35

For Variable Speed use:-
Part Time Output when Inverter powered is...
36.22Nm - 11kW ( 14.75HP) x 2900 RPM at 100 Hz
72.45Nm - 11kW ( 14.75HP) x 1450 RPM at 50 Hz
72.45Nm -5.5kW ( 7.37HP) x 725 RPM at 25 Hz
72.45Nm - 1.1kW (1.47HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
51.7Nm -11kW ( 14.75HP) x 2030 RPM at 70 Hz
72.45Nm -11kW ( 14.75HP) x 1450 RPM at 50 Hz
61.58Nm - 4.68kW ( 6.27HP) x 725 RPM at 25 Hz
36.23Nm - 0.55kW (0.74HP) x 145 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.