TEC Electric Cast Iron 18.5kW 3ph 4 Pole Premium Efficiency (IE3), B5 Flange, 180M Frame AC Motor for 400V or 690V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 18.5kW at 1460RPM, 400V or 690V Three Phase 50Hz.
Inverter Supply Output: 14:1 Speed Control range from 146RPM to 2044 RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds
Full Load Current: 33.53A at 400V (DELTA) or 19.36A at 690V (STAR)
Power Factor: 0.86 when mains connected at 50Hz.
Efficiency: 92.6% at full load.
Full Load Torque: 121Nm
350mm Wide x 687mm Long x 445mm High (Including terminal box)
Flange mount on 19mm holes at 300mm PCD with 250mm diameter spigot in the 350mm diameter flange
Shaft: 48mm dia x 110mm long with 14mm wide key
Removable Feet
Cast Iron, IP55
Weight: 170kg.
Rated at 40C Ambient.
Cooling: IC411. Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 18.543TECCB5-IE3 Frame Reference: T3C 180M-4
Please note that this motor will be supplied with feet. These can be removed using a standard hex key to convert it to face mount only.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.