TEC Electric 5.5kW 3ph 4 Pole Premium Efficiency (IE3) B34 Foot and Face 132S Frame AC Motor for 400V or 690V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having a 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 5.5kW at 1460RPM, 400V or 690V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 146RPM to 2044RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 10.55A at 400V (DELTA)
Power Factor: 0.84 when mains connected at 50Hz.
Efficiency: 89.6% at full load.
Full Load Torque: 35.97Nm
261mm Wide x 460mm Long x 318mm High (Including terminal box)
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder: Face mount on 4 x M10 tapped holes at 165mm PCD with 130mm diameter register in the 200mm diameter flange
Shaft: 38mm diameter, 80mm long with 10mm key
IP55
Weight: 47.4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 5.543TECAB34-IE3. Frame Reference: T3A 132S4C-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.