TEC Electric IE3 5.5kW 3ph 4 Pole Premium Efficiency Foot Mounting (B3) 112M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 1440RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 144RPM to 2016RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 11.32/6.53A at 400/690V.
Power Factor: 0.86 when mains connected at 50Hz.
Enclosure Rating: IP55.
Dimensions: 224mm Wide x 397mm Long x 278mm high overall in its IP55 enclosure.
Flange mount on 4 x 15mm holes at 215mm PCD with 180mm diameter spigot in 250mm diameter flange
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Shaft: 28mm dia x 60mm with 8mm wide key.
Ambient: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for external over-temperature protection device.
Part Number: 5.543TECAB35-112-IE3.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.