TEC Electric 1.5kW 3ph 2 Pole High Efficiency Foot and Flange Mounting (B35) 90S Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed mains supply output: 1.5kW (2HP) x 2850RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 285RPM to 3990RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 5.5A at 230V, or 3.2A at 400V.
Power Factor: 0.83 when mains connected at 50Hz.
Efficiency: 81.4% (A more efficient motor is available, please see linked products below)
Dimensions: 175mm Wide x 333mm Long x 229mm high overall.
Enclosure Rating: IP55.
Foot Mounting: On 10mm holes at 140mm wide x 100mm centres 50mm back from the shaft shoulder.
Flange Mounting: On 12mm holes at 165mm PCD with 130mm diameter register in the 200mm diameter flange.
Shaft: 24mm dia x 50mm with 8mm wide key.
Weight: 13.2kg.
Ambient Temperature: Rated at 40C.
Ventilation space is required at rear cooling air intake.
Over-temperature Protection: Thermistor for use with external over protection device (see the items linked below).
Part Number: 1.523TECAB35-IE2. Previous Part Number was: TECA2-90S-2-B35
For Variable Speed use:-
Part Time Output when Inverter powered is...
3.59Nm - 1.5kW ( 2.01HP) x 3990 RPM at 70 Hz
5.03Nm - 1.5kW ( 2.01HP) x 2850 RPM at 50 Hz
5.03Nm -0.75kW ( 1.01HP) x 1425 RPM at 25 Hz
5.03Nm - 0.15kW ( 0.2HP) x 285 RPM at 5 Hz
Continuous Output when Inverter powered is...
3.59Nm - 1.5kW ( 2.01HP) x 3990 RPM at 70 Hz
5.03Nm - 1.5kW ( 2.01HP) x 2850 RPM at 50 Hz
4.27Nm - 0.64kW ( 0.85HP) x 1425 RPM at 25 Hz
2.51Nm - 0.075kW ( 0.1HP) x 285 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.