TEC Electric 1.5kW 3ph 2 Pole High Efficiency Foot and Face Mounting (B34) 90S Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Output: 1.5kW (2HP) x 2850RPM at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 14:1 Speed Control range from 285RPM to 3990RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Constant Power Speed Range: 2850rpm to 3990RPM continuously.
Full Load Current: 5.5A at 230V, or 3.2A at 400V.
Power Factor: 0.83 when mains connected at 50Hz.
Efficiency: 81.4%
Dimensions: 175mm Wide x 333mm Long x 229mm high overall.
Enclosure Rating: IP55.
Mounting: Foot mount on 10mm holes at 140mm wide x 100mm centres 56mm back from the shaft shoulder and/or Face mount on M8 tapped holes at 115mm PCD with 95mm diameter register in the 140mm diameter flange.
Shaft: 24mm dia x 50mm with 8mm wide key.
Weight: 13.2kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Over-Temperature Proitection: Thermistors included for use with an external over-temperature protection relay (not included - see the items linked below).
Part Number: 1.523TECAB34-IE2. Previous Part Number: TECA2-90S-2-B34
For Variable Speed use:-
Part Time Output when Inverter powered:-
3.59Nm, 1.5kW (2HP) x 3990RPM at 70Hz.
5.03Nm, 1.5kW (2HP) x 2850RPM at 50Hz.
5.03Nm, 0.75kW (1HP) x 1425RPM at 25Hz.
5.03Nm, 0.15kW (0.2HP) x 285RPM at 5Hz.
Continuous Output when Inverter powered:-
3.59Nm, 1.5kW (2HP) x 3990RPM at 70Hz.
5.03Nm.1.5kW (2HP) x 2850RPM at 50Hz.
4.27Nm, 0.64kW (0.85HP) x1425RPM at 25Hz.
2.51Nm, 0.075kW (0.1HP) x 285RPM at 5Hz.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.