TEC Electric - 2.2kW 3ph 2 Pole High Efficiency Face Mounting (B14) 90 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz. Motor has a non standard 20mm shaft instead of te standard 24mm
Fixed mains supply output: 2.2kW (3HP) x 2860RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 286RPM to 4004RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 7.86A at 230V, or 4.54A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 83.2%
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links 'two at one side' for 400V 'Star' connection.
175mm Wide x 367mm Long x 229mm high overall in its IP55 enclosure.
Face mount on M8 tapped holes at 115mm PCD with 95mm diameter spigot in the 140mm diameter flange.
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from the shaft shoulder
Shaft is 20mm dia x 50mm long, no key.
Weight is 17.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 2.223TECAB34-IE2/NEW SHAFT.
For Variable Speed use:-
Part Time Output when Inverter powered is...
5.2 Nm - 2.20 kW ( 2.9 HP) x 4004 RPM at 70 Hz
7.3 Nm - 2.20 kW ( 2.9 HP) x 2860 RPM at 50 Hz
7.3 Nm - 1.10 kW ( 1.5 HP) x 1430 RPM at 25 Hz
7.3 Nm - 0.22 kW ( 0.3 HP) x 286 RPM at 5 Hz
Continuous Output when Inverter powered is...
5.2 Nm - 2.20 kW ( 2.9 HP) x 4004 RPM at 70 Hz
7.3 Nm - 2.20 kW ( 2.9 HP) x 2860 RPM at 50 Hz
6.2 Nm - 0.94 kW ( 1.3 HP) x 1430 RPM at 25 Hz
3.7 Nm - 0.11 kW ( 0.1 HP) x 286 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.