TEC Electric – IE2 18.5kW (25HP) 4 Pole AC Induction Motor 400V B5 Flange Mount - 180M Frame

TEC Electric - 18.5kW 3ph 4 Pole High Efficiency Flange Mounting (B5) 180M Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 18.5kW (25HP) x 1460RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 146RPM to 2920RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 34.4A at 400V.
Power Factor is 0.85 when mains connected at 50Hz.
Efficiency is 91.4%

340mm Wide x 730mm Long x 440mm high overall in its IP55 enclosure.
Flange mount on 19mm holes at 300mm PCD with 250mm diameter spigot in the 350mm diameter flange.
Shaft is 48mm dia x 110mm with 14mm wide key.
Weight is 119kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-180M-4-B5

For Variable Speed use:-
Part Time Output when Inverter powered is...
60.51Nm - 18.5kW ( 24.80HP) x 2920 RPM at 100 Hz
121.01Nm - 18.5kW ( 24.80HP) x 1460 RPM at 50 Hz
121.01Nm -9.25kW ( 12.40HP) x 730 RPM at 25 Hz
121.01Nm - 1.85kW (2.48HP) x 146 RPM at 5 Hz
Continuous Output when Inverter powered is...
86.4Nm -18.5kW ( 24.80HP) x 2044 RPM at 70 Hz
121.01Nm -18.5kW ( 24.80HP) x 1460 RPM at 50 Hz
102.86Nm - 7.86kW ( 10.54HP) x 730 RPM at 25 Hz
60.51Nm - 0.93kW (1.24HP) x 146 RPM at 5 Hz

Download the full Manual and Dimensions from the links below:-