TEC Electric 15kW 3ph 2 Pole High Efficiency Foot Mounting (B3) 160M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 15kW (20HP) x 2930RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 293RPM to 4102RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 26.9A at 400V.
Power Factor: 0.89 when mains connected at 50Hz.
Efficiency: 90.3%
Dimensions: 290mm Wide x 640mm Long x 384mm high overall.
Enclosure Rating: IP55.
Foot mount on 15mm holes at 254mm wide x 210mm centres 108mm back from the shaft shoulder.
Shaft: 42mm dia x 110mm with 12mm wide key.
Weight: 96.6kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for use with external over-temperature protection device (not included).
Part Nmber: TECA2-160M2-2-B3
Part Time Output when Inverter Powered:-
34.9Nm, 15kW (20HP) x 4102RPM at 70Hz.
48.9Nm, 15kW (20HP) x 2930RPM at 50Hz.
48.9Nm. 7.5kW (10HP) x 1465RPM at 25Hz.
48.9Nm 1.5kW (2HP) x 293RPM at 5Hz.
Continuous Output when Inverter Powered-.
34.9Nm, 15kW (20HP) x 4102RPM at 70Hz.
48.9Nm, 15kW (20HP) x 2930RPM at 50Hz.
41.6Nm, 6.4kW (8.6HP) x 1465RPM at 25Hz.
24.5Nm, 0.75kW (1HP) x 293RPM at 5Hz.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.