TEC Electric - 15kW 3ph 4 Pole High Efficiency Face Mounting (B14) 160L Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 15kW (20HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 28.4A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 90.6%
290mm Wide x 640mm Long x 384mm high overall in its IP55 enclosure.
Face mount on M12 tapped holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange.
Shaft is 42mm dia x 110mm with 12mm wide key.
Weight is 103.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-160L1-4-B14
For Variable Speed use:-
Part Time Output when Inverter powered is...
49.40Nm - 15kW ( 20.11HP) x 2900 RPM at 100 Hz
98.79Nm - 15kW ( 20.11HP) x 1450 RPM at 50 Hz
98.79Nm -7.5kW ( 10.05HP) x 725 RPM at 25 Hz
98.79Nm - 1.5kW (2.01HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
70.6Nm -15kW ( 20.11HP) x 2030 RPM at 70 Hz
98.79Nm -15kW ( 20.11HP) x 1450 RPM at 50 Hz
83.97Nm - 6.38kW ( 8.55HP) x 725 RPM at 25 Hz
49.40Nm - 0.75kW (1.01HP) x 145 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.