TEC IE2 7.5kW Aluminium Three Phase Motor 400V 2 Pole 132S Frame B3 with Force Vent

7.523TECAB3-FV-230 (TECA2-132S2-2-B3 + FV)

Order Code: 25657
Photo of TEC IE2 7.5kW Aluminium Three Phase Motor 400V 2 Pole 132S Frame B3 with Force Vent
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECA Three Phase IE2 Aluminium

TEC Electric - 7.5kW 3ph 2 Pole High Efficiency Foot Mounting (B3) 132S Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.  Complete with 230V, single phase, axially mounted force ventilation fan.

Fixed mains supply output: 7.5kW (10HP) x 2910RPM at 400V x 50Hz 3ph.
Inverter Supply Output: Continuous operation from zero to maximum motor rated speed of 2910rpm

Full Load Current - 13.8A at 400V.
Power Factor is 0.89 when mains connected at 50Hz.
Efficiency is 88.1%

252mm Wide x 437mm Long (plus 60mm extra for FV fan) x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 51kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 7.523TECAB3-FV-230. Previous Part Number was - TECA2-132S2-2-B3 + FV

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.