TEC Electric 5.5kW 3ph 2 Pole High Efficiency Foot and Face Mounting (B34) 132S Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed Mains Supply Output: 5.5kW (7.5HP).
Speed: 2900RPM.
Voltage: 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 290RPM to 4060RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 10.2A at 400V.
Power Factor: 0.89 when mains connected at 50Hz.
Efficiency: 87.2%. (A more efficient motor is available, please see linked products below)
Dimensions: 252mm Wide x 437mm Long x 318mm high overall.
Enclosure Rating: IP55.
Mounting: Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder, or Face mount on M10 tapped holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft: 38mm dia x 80mm with 10mm wide key.
Weight: 42.3kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for external over-temperature protection device.
Part Number: 5.523TECAB34-IE2. Legacy Part Number: TECA2-132S1-2-B34.
For Variable Speed use:-
Part Time Output when Inverter powered:
12.94Nm - 5.5kW ( 7.37HP) x 4060 RPM at 70 Hz
18.11Nm - 5.5kW ( 7.37HP) x 2900 RPM at 50 Hz
18.11Nm -2.75kW ( 3.69HP) x 1450 RPM at 25 Hz
18.11Nm - 0.55kW ( 0.74HP) x 290 RPM at 5 Hz
Continuous Output when Inverter powered:
12.94Nm - 5.5kW ( 7.37HP) x 4060 RPM at 70 Hz
18.11Nm - 5.5kW ( 7.37HP) x 2900 RPM at 50 Hz
15.4Nm - 2.34kW ( 3.13HP) x 1450 RPM at 25 Hz
9.06Nm - 0.275kW ( 0.37HP) x 290 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.