TEC IE2 5.5kW Aluminium Three Phase Motor 230V 4 Pole 132S Frame B35

TEC Electric - 5.5kW 3ph 4 Pole High Efficiency Foot and Flange Mounting (B35) 132S Frame AC Motor Rewound for a 230V or 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 5.5kW (7.5HP) x 1450RPM at 230V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 10.9A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.

252mm Wide x 437mm Long x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder.
Flange mount on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 43kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 5.543TECAB35-IE2-230/400/3/50.

For Variable Speed use:-
Part Time Output when Inverter powered is...
18.11Nm - 5.5kW ( 7.37HP) x 2900 RPM at 100 Hz
36.22Nm - 5.5kW ( 7.37HP) x 1450 RPM at 50 Hz
36.22Nm -2.75kW ( 3.69HP) x 725 RPM at 25 Hz
36.22Nm - 0.55kW (0.74HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
25.9Nm -4kW ( 5.36HP) x 2030 RPM at 70 Hz
36.22Nm -5.5kW ( 7.37HP) x 1450 RPM at 50 Hz
30.79Nm - 2.34kW ( 3.13HP) x 725 RPM at 25 Hz
18.11Nm - 0.28kW (0.37HP) x 145 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.