TEC Electric - 2.2kW 3ph 4 Pole High Efficiency Foot and Face Mounting (B34) 100L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed mains supply output: 2.2kW (3HP) x 1440RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 144RPM to 2016RPM for 5Hz to 70Hz control (or to 2880RPM for 100Hz), with suitable de-rating at the lower speeds.
Full Load Current - 8.37A at 230V, or 4.83A at 400V.
Power Factor is 0.78 when mains connected at 50Hz.
Efficiency is 84.3% (A more efficient motor is available, please see linked products below)
198mm Wide x 369mm Long x 252mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 160mm wide x 140mm centres 63mm back from the shaft shoulder.
Face mount on M8 tapped holes at 130mm pcd with 110mm register in the 160mm diameter flange.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 22.4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 2.243TECAB34-IE2. Previous Part Number was- TECA2-100L1-4-B34
For Variable Speed use:-
Part Time Output when Inverter powered is...
7.30Nm - 2.2kW ( 2.95HP) x 2880 RPM at 100 Hz
14.59Nm - 2.2kW ( 2.95HP) x 1440 RPM at 50 Hz
14.59Nm -1.1kW ( 1.47HP) x 720 RPM at 25 Hz
14.59Nm - 0.22kW (0.29HP) x 144 RPM at 5 Hz
Continuous Output when Inverter powered is...
10.4Nm -2.2kW ( 2.95HP) x 2016 RPM at 70 Hz
14.59Nm -2.2kW ( 2.95HP) x 1440 RPM at 50 Hz
12.40Nm - 0.94kW ( 1.25HP) x 720 RPM at 25 Hz
7.30Nm - 0.11kW (0.15HP) x 144 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.