TEC Electric - 5.5kW 3ph 2 Pole Compact Foot and Face Mounting (B34) 112M Frame AC Motor for 400/690V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 2920RPM at 400/690V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 292RPM to 4088RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 10.49/6.06A at 400/690V.
Full Load Torque: 17.99Nm.
Power Factor is 0.8 when mains connected at 50Hz.
Efficiency is 87%
Dimensions: 224mm Wide x 397mm Long x 278mm high overall in its IP55 enclosure.
Face mount on M8 tapped holes at 130mm PCD with 110mm diameter spigot in the 160mm diameter flange.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 32.5kg.
Rated at 40°C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 5.523TECAB34-112-IE3.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.