TEC Electric - 30kW 3ph 2 Pole High Efficiency Foot and Flange Mounting (B35) 200L Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 30kW (40HP) x 2950RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 295RPM to 4130RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 52.3A at 400V.
Power Factor is 0.9 when mains connected at 50Hz.
Efficiency is 92%
390mm Wide x 745mm Long x 460mm high overall in its IP55 enclosure.
Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder and Flange mount on 19mm holes at 350mm PCD with 300mm diameter spigot in the 400mm diameter flange.
Shaft is 55mm dia x 110mm with 16mm wide key.
Weight is 181.3kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-200L1-2-B35
For Variable Speed use:-
Part Time Output when Inverter powered is...
69.37Nm - 30kW ( 40.21HP) x 4130 RPM at 70 Hz
97.12Nm - 30kW ( 40.21HP) x 2950 RPM at 50 Hz
97.12Nm -15kW ( 20.11HP) x 1475 RPM at 25 Hz
97.12Nm - 3kW ( 4.02HP) x 295 RPM at 5 Hz
Continuous Output when Inverter powered is...
69.37Nm - 30kW ( 40.21HP) x 4130 RPM at 70 Hz
97.12Nm - 30kW ( 40.21HP) x 2950 RPM at 50 Hz
82.55Nm - 12.75kW ( 17.09HP) x 1475 RPM at 25 Hz
48.56Nm - 1.5kW ( 2.01HP) x 295 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.