TEC IE4 75kW Cast Iron 400V 2 Pole 3ph AC Motor 280S Frame B35

TEC Electric 75kW 3ph 2 Pole High Efficiency (IE4) B35 Foot and Flange 280S Frame AC Induction Motor for 400V or 690V 3 phase supply  
Suitable for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz/60Hz.

Rating: 75kW, 2980RPM at 400V or 690V 3ph 50Hz

Full Load Current: 127.23A at 400V (DELTA)
Full Load Current: 73.76A at 690V (Star)
Power Factor: 0.89 when mains connected at 50Hz
Efficiency (IE4): 95.6% at full load.
    95.8% at 75% load
    95% at 50% load
Full Load Torque: 240.35Nm 

559mm Wide x 984mm Long x 673mm High (Including terminal box)
Foot mount on 24mm holes at 457mm wide x 368mm centres 190mm back from the shaft shoulder:
Flange mount on 8 x 19mm holes equispaced on 500mm PCD with 450mm diameter spigot in the 550mm diameter flange
Shaft: 65mm diameter, 140mm long with 18mm key
Cable Glands: 2 x M50
DE Bearings: 6316C3
NDE Bearings: 6316C3

Construction: Cast Iron
IP55
Weight: 554kg

Rated at 40C Ambient
IC 411 Ventilation, space required at rear for cooling air intake
Thermistors fitted (1 per winding)

Part Number: 75.023TECCB35-IE4  Frame Ref: T4C-280S-2-B35