TEC Electric Cast Iron 37kW 3ph 4 Pole Premium Efficiency (IE3), B5 Flange, 225S Frame AC Motor for 400V or 690V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 37kW at 1470RPM, 400V or 690V Three Phase 50Hz.
Inverter Supply Output: 14:1 Speed Control range from 147RPM to 2058RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds
Full Load Current: 65.37A at 400V (DELTA) or 37.74A at 690V (STAR)
Power Factor: 0.87 when mains connected at 50Hz.
Efficiency: 93.9% at full load.
Full Load Torque: 240Nm
450mm Wide x 810mm Long x 557mm High (Including terminal box)
Flange mount on 19mm holes at 400mm PCD with 350mm diameter spigot in the 450mm diameter flange
Shaft: 60mm dia x 140mm long with 18mm wide key
Removable Feet
Cast Iron, IP55
Weight: 324.5kg.
Rated at 40C Ambient.
Cooling: IC411. Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 37.43TECCB5-IE3 Frame Reference: T3C 225S-4
Please note that this motor will be supplied with feet. These can be removed using a standard hex key to convert it to face mount only.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site