TEC Electric 7.5kW 3ph 4 Pole B35 Foot and Flange 132M Frame AC Motor for 400V or 690V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having a 3ph output, or a fixed frequency mains supply at 50Hz.
Output: 7.5kW at 1450rpm, 400V or 690V, 50Hz 3ph.
Speed Range from Inverter Supply: From 5rpm to 70rpm for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Fitted with Electronic Holding brake and emergency hand release handle
Brake Torque 46Nm
Brake Voltage: 190Vdc. (Half wave rectifier - mains x 0.45), 100Nm Torque.
As Default the brake is connected across one phase in the motor terminal box which gives the 190Vdc required. However if used with an AC Inverter these brake connections must be connected to a separate 400V supply (L-L) to operate the brake as the AC Inverter output is not suitable.
Full Load Current with links in Delta for 400V 3ph: 14.26 A (Default)
Full Load Current with links in Star for 690V 3ph: 8.2 A.
Torque: 49.4Nm
Efficiency: 90.4 (IE3)
Terminal box position: Top (default), sides (move feet).
Enclosure rating: IP55
Dimensions: 300mm Wide x 588mm Long (Including shaft) x 318mm high overall (Including terminal box)
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder:
Flange mount on 4 x 15mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange
Shaft: 38mm diameter, 80mm long with 10mm key.
Construction: Aluminium with removable feet.
Weight is 58kg.
Rated at 40°C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part Number: 7.543TECAB35-IE3-BM-JL. Ref: MSB132M-4.