TEC Electric 1.1kW 3ph 4 Pole Premium Efficiency (IE3) B35 Foot and Flange 90S Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 1ph or input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 1.1 kW at 1440RPM, 230V or 400V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 144RPM to 2016 RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 4.48A at 230V (DELTA) or 2.59A at 400V (STAR)
Power Factor: 0.73 when mains connected at 50Hz.
Efficiency: 84.1% at full load.
Full Load Torque: 7.29Nm
200mm Wide x 312mm Long x 231mm High (Including terminal box)
Foot mount on 10mm holes at 140mm wide x 100mm centres 56mm back from the shaft shoulder; Flange mount on 4 x 12mm holes equispaced on 165mm PCD with 130mm diameter spigot in the 200mm diameter flange
Shaft: 24mm diameter, 50mm long with 8mm key
IP55
Weight: 15.1kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 1.143TECAB35-IE3. Frame Reference: T3A 90S4A-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.