TEC Electric 5.5kW 3ph 4 Pole Premium Efficiency (IE3) B35 Foot and Flange 132 Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having a 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
** 5.5kW motors at this rating are normally 400V (DELTA) and 690V (STAR) - see item listed below**
** This motor is suitable for a 3 phase 230V supply which can be generated by a single phase AC Inverter - see item listed below**
Rating: 5.5kW at 1460RPM, 230V or 400V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 146RPM to 2044RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 18.27A at 230V (DELTA)
Full Load Current: 10.55A at 400V (Star)
Power Factor: 0.84 when mains connected at 50Hz.
Efficiency: 89.64% at full load.
Full Load Torque: 35.98Nm
300mm Wide x 460mm Long x 318mm High (Including terminal box)
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder; Flange mount on 4 x 14.5mm holes equispaced on 265mm PCD with 230mm diameter spigot in the 300mm diameter flange
Shaft: 38mm diameter, 80mm long with 10mm key
IP55
Weight: 47.4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 5.543TECAB35-230V-IE3. Frame Reference: T3A 132S4C-230V-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.