TEC Electric 2.2kW 3ph 4 Pole Premium Efficiency (IE3) B35 Foot and Flange 100L Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 1ph or input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 2.2kW at 1450RPM, 230V or 400V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 145RPM to 2030 RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 7.93A at 230V (DELTA) or 4.58A at 400V (STAR)
Power Factor: 0.8 when mains connected at 50Hz.
Efficiency: 86.7% at full load. (A more efficient motor is available, please see linked products below)
Full Load Torque: 14.4Nm
250mm Wide x 375mm Long x 255mm High (Including terminal box)
Foot mount on 12mm holes at 160mm wide x 140mm centres 63mm back from the shaft shoulder: Flange mount on 4 x 14.5mm holes equispaced on 215mm PCD with 180mm diameter spigot in the 250mm diameter flange
Shaft: 28mm diameter, 60mm long with 8mm key
IP55
Weight: 23.9kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 2.243TECAB35-IE3. Frame Reference: T3A 100L4A-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.