Marelli - High Efficiency 90 Frame 1.5kW 3ph 2 Pole Foot Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. Use with any Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 1.5kW (2.0HP) x 2870RPM at 230V or 400V x 50Hz 3ph
Inverter supply output: 12:1 Speed Control range from 287RPM to 3444RPM for 5Hz to 60Hz with suitable de-rating at the lower speeds.
Full Load Current - 5.42A at 230V, or 3.13A at 400V.
Power Factor is 0.85 when mains connected at 50Hz.
Efficiency is 81.4% at full load, 81.2% at 75% load and 79.2% at half load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 2 x M20 Glands
176mm Wide x 325mm Long x 240mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 140mm wide x 100mm centres 56mm back from shaft shoulder.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 13.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - MAQ90S2 B3
For Variable Speed use:-
Part Time Output when Inverter powered is...
4.16Nm - 1.5kW (2HP) x 3444RPM at 60Hz
4.99Nm - 1.5kW (2HP) x 2870RPM at 50Hz
4.99Nm - 0.75kW (1HP) x 1435RPM at 25Hz
4.99Nm - 0.15kW (0.2HP) x 287RPM at 5Hz
Continuous Output when Inverter powered is...
4.16Nm - 1.5kW (2HP) x 3444RPM at 60Hz
4.99Nm - 1.5kW (2HP) x 2870RPM at 50Hz
4.24Nm - 0.64kW (0.855HP) x 1435RPM at 25Hz
2.5Nm - 0.075kW (0.101HP) x 287RPM at 5Hz
Download the Dimensions and MAQ Motor Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.