Brook Crompton Series 10 IE1 0.12kW (1/6HP) three phase 4 pole B35 Foot and Flange mounting 63 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 120W (0.16HP) x 1310rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 27:1 Range from 131rpm to 3600rpm for 5Hz to 137Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 1310rpm to 3600rpm continuously. The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 0.73A.
Full Load Current with links in Y (Star) for 400V 3ph: 0.42A.
Torque: 0.87Nm at 50Hz.
Efficiency: 57.00% (IE1)
Power Factor: 0.72 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 140mm wide x 217mm long x 173mm high overall.
Mounting: Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from the shaft shoulder.
Flange mount on 4 x 10mm holes equispaced on 115mm PCD with 95mm diameter spigot in the 140mm diameter flange.
Shaft: 11mm diameter, 23mm long with 4mm key.
Construction: Aluminium
Weight: 4.80kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: included.
Part number: B-DA63MA-H 4P B35.
Download the Technical Catalogue from the link below:-