Brook Crompton Series 10 IE1 0.12kW (1/6HP) three phase 2 pole B35 Foot and Flange mounting 56 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 120W (0.16HP) x 2750rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 19:1 Range from 275rpm to 5200rpm for 5Hz to 95Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 2750rpm to 5200rpm continuously. The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 0.62A.
Full Load Current with links in Y (Star) for 400V 3ph: 0.36A.
Torque: 0.42Nm at 50Hz.
Efficiency: 67.00% (IE1) (A more efficient motor is available, see the linked products below)
Power Factor: 0.72 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 120mm wide x 199mm long x 157mm high overall.
Mounting: Foot mount on 5.8mm holes at 90mm wide x 71mm centres 36mm back from the shaft shoulder.
Flange mount on 4 x 7mm holes equispaced on 100mm PCD with 80mm diameter spigot in the 120mm diameter flange.
Shaft: 9mm diameter, 20mm long with 3mm key.
Construction: Aluminium
Weight: 3.90kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: B-DA56MB-H 2P B35.
Download the Technical Catalogue from the link below:-