Brook Crompton Series 10 IE2 0.55kW (0.75HP) three phase 4 pole B5 Flange mounting 80 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 0.55kW (0.75HP) at 1400rpm. 230V or 400V, 50Hz 3ph.
Speed Range from an Inverter Supply: From 140rpm to 4500rpm for 5Hz to 160Hz, when de-rated at the lower speeds.
The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 2.39A.
Full Load Current with links in Y (Star) for 400V 3ph: 1.37A.
Torque: 3.75Nm
Efficiency: 77.1% (IE2)
Power Factor: 0.75 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M25 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 200mm wide x 285mm long x 205mm high overall.
Mounting: B5 Flange. Also known as IM3001, D Flange
Flange mount on 4 x 12mm holes equispaced on 165mm PCD with 130mm diameter spigot in the 200mm diameter flange
Shaft: 19mm diameter, 40mm long with 6mm key
Construction: Aluminium
Weight: 9kg.
This motor may be supplied with feet which can be easily removed
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear to allow for cooling air intake.
Over-Temperature Detection: not included.
Part number: 080A209206 or A-DA80MA-D IE2 B5