Brook Crompton Series 10 IE2 0.12kW (0.2HP) three phase 2 pole B34 Foot and Face mounting 56 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 0.12kW (0.2HP) at 2720rpm. 230V or 400V, 50Hz 3ph.
Speed Range from an Inverter Supply: From 272rpm to 5200rpm for 5Hz to 95Hz, when de-rated at the lower speeds.
The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 0.78A.
Full Load Current with links in Y (Star) for 400V 3ph: 0.45A.
Torque: 0.42Nm
Efficiency: 53.62% (IE2)
Power Factor: 0.72 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 111mm wide x 200mm long x 153mm high overall.
Mounting: B34 Foot and Face. Also known as IM2101, Foot and C Flange
Foot mount on 5.8mm holes at 90mm wide x 71mm centres 36mm back from shaft shoulder; Face mount on 4 x M5 tapped holes at 65mm PCD with 50mm diameter register in the 80mm diameter flange
Shaft: 9mm diameter, 20mm long with 3mm key
Construction: Aluminium
Weight: 4.4kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear to allow for cooling air intake.
Over-Temperature Detection: not included.
Part number: 056A500003 or A-DA56MB-IE2 B34