TEC IE4 90kW Cast Iron 400V 4 Pole 3ph AC Motor 280M Frame B35

TEC Electric 90kW 3ph 4 Pole High Efficiency (IE4) B35 Foot and Flange 280M Frame AC Induction Motor for 400V or 690V 3 phase supply  
Suitable for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz/60Hz

Rating: 90kW, 1485RPM at 400V or 690V 3ph 50Hz

Full Load Current: 153.61A at 400V (DELTA)
Full Load Current: 89.05A at 690V (Star)
Power Factor: 0.88 when mains connected at 50Hz
Efficiency (IE4): 96.1% at full load
    96.1% at 75% load
    95.8% at 50% load
Full Load Torque: 578.79Nm 

559mm Wide x 1035mm Long x 690mm High (Including terminal box)
Foot mount on 24mm holes at 457mm wide x 419mm centres 190mm back from the shaft shoulder:
Flange mount on 8 x 19mm holes equispaced on 500mm PCD with 450mm diameter spigot in the 550mm diameter flange
Shaft: 75mm diameter, 140mm long with 20mm key
Cable Glands: 2 x M50
DE Bearings: 6316C3
NDE Bearings: 6316C3

Construction: Cast Iron
IP55
Weight: 578.8kg
Rated at 40C Ambient
IC 411 Ventilation, space required at rear for cooling air intake
Thermistors fitted (1 per winding)

Part Number: 90.043TECCB35-IE4  Frame Ref: T4C-280M-4-B35