TEC Electric High Efficiency 100 Frame 3kW 3ph 4 Pole Face Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. For use with a Variable Frequency Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed Mains Supply Output: 3kW (4HP).
Speed: 1450RPM.
Voltage: 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 145RPM to 2175RPM for 5Hz to 75Hz, with suitable de-rating at the lower speeds.
Full Load Current: 10.96A at 230V, or 6.33A at 400V.
Power Factor: 0.8 when mains connected at 50Hz.
Efficiency: 85.5%. (A more efficient motor is available, please see linked products below)
Set terminal box links 'three a-breast' for 230V 'Delta' connection, or ‘two at one side’ for 400V 'Star' connection.
Terminal Box: For 2 x M25 Glands.
Dimensions: 199mm Wide x 388mm Long x 265mm high overall.
Enclosure Rating: IP55.
Face mount on M8 tapped holes at 115mm PCD with 95mm diameter register in the 140mm diameter flange.
Shaft: 28mm dia x 60mm with 8mm wide key.
Shaft side load: 87kg for 20,000hrs life (6206-2Z bearing).
Weight: 26.5kg.
Ambient: Rated at 40C.
Ventilation space required at rear cooling air intake.
Part Number: 3.043TECAB14-IE2, (TECA2-100L2-4-B14)
For Variable Speed use:-
Part Time Output when Inverter Powered:-
9.95Nm, 3kW ( 4HP) x 2880 RPM at 100 Hz.
19.90Nm, 3kW ( 4HP) x 1440 RPM at 50 Hz.
19.90Nm, 1.5kW ( 2HP) x 720 RPM at 25 Hz.
19.90Nm, 0.3kW (0.4HP) x 144 RPM at 5 Hz.
Continuous Output when Inverter powered:-
14.2Nm, 3kW ( 4HP) x 2016 RPM at 70 Hz.
19.90Nm, 3kW ( 4HP) x 1440 RPM at 50 Hz.
16.92Nm, 1.28kW ( 1.7HP) x 720 RPM at 25 Hz.
9.95Nm, 0.15kW (0.2HP) x 144 RPM at 5 Hz.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.